Serialport Settings; Serialport Loginrequired; Serialport Mode - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port (connection via Micro USB to USB cable). The serial port uses
115200 bps, 8 data bits, no parity and 1 stop bit.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.

SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
96
Administrator Guide
System settings System settings Appendices