Download  Print this page

Serialport Settings; Serialport Loginrequired; Serialport Mode - Cisco TelePresence MX200 G2 Administrator's Manual

Hide thumbs

Advertisement

Cisco TelePresence MX200 G2 and MX300 G2
Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port (connection via Micro USB to USB cable). The serial port uses
115200 bps, 8 data bits, no parity and 1 stop bit.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.

SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration
Peripherals
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
99
Administrator Guide
System settings
System settings
Appendices

Advertisement

Table of Contents

   Related Manuals for Cisco TelePresence MX200 G2

This manual is also suitable for:

Telepresence mx300 g2

Comments to this Manuals

Symbols: 0
Latest comments: