Add A Welcome Banner - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Add a welcome banner

Adding a Welcome banner is only available using API commands;
we don't provide a dedicated user interface for it.
API commands
xCommand SystemUnit WelcomeBanner Set
This is a multiline command. Anything you input after you issue
the command, is input to the command (including line breaks).
Finish the input with a separate line containing just a period
ending with a line break.
There are also a few more welcome banner commands, refer to
the API-guide for more details.
xCommand SystemUnit WelcomeBanner Clear
xCommand SystemUnit WelcomeBanner Get
Example
xCommand SystemUnit WelcomeBanner Set <enter>
This is a welcome banner. <enter>
A welcome banner may have multiple lines. <enter>
. <enter>
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Configuration Peripherals Maintenance
This is a sign in banner
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
45
Administrator Guide
System settings Appendices
About welcome banner
You can set up a welcome banner that
users see after they sign in to the video
system's web interface or command line
interface. The banner can have multiple
lines.
The banner can for example contain
information you need in order to get
started, or things you must be aware of
when setting up the system.
The maximum size is: 4 kByte
Welcome banner versus sign in
banner
Sign in banner:
• The banner is shown before the user
signs in to the web interface or the
command line interface.
Welcome banner:
• The banner is shown after the user
has signed in to the web interface or
the command line interface.