Roomreset Settings; Roomreset Control - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

RoomReset settings

RoomReset Control

This setting is for use with control systems or macros. Macros allow you to write snippets
of JavaScript code that can automate parts of your video endpoint, thus creating custom
behavior.
When a room has been idle for some time the system can send an event to indicate that the
room is ready to be reset.
The events that are sent when this setting is enabled are:
*e RoomReset SecondsToReset: 30
** end
*e RoomReset Reset
** end
Requires user role: ADMIN
Default value: On
Value space: CameraPositionsOnly/Off/On
CameraPositionsOnly: Not applicable.
Off: No RoomReset events will be sent.
On: The room reset control is enabled and RoomReset events will be sent.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
132
Administrator Guide
System settings System settings Appendices