Cisco TelePresence SX80
Introduction
SerialPort settings
SerialPort Mode
Enable/disable the serial port (COM port).
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.
SerialPort BaudRate
Define the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 115200.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1;
Flow control: None.
Requires user role: ADMIN
Default value: 115200
Value space: 9600/19200/38400/57600/115200
Set a baud rate from the baud rates listed (bps).
SerialPort LoginRequired
Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration
Peripherals
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
119
Administrator Guide
System settings
System settings
Appendices