Userinterface Phonebook Mode; Userinterface Security Mode; Userinterface Settingsmenu Mode; Userinterface Settingsmenu Visibility - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

UserInterface Phonebook Mode

This setting determines if a user is allowed to add or change a contact in the Directory and
Favorites list from the user interface of the video system.
Requires user role: ADMIN, INTEGRATOR
Default value: ReadWrite
Value space: ReadOnly/ReadWrite
ReadOnly: You neither can add a contact to the Favorites list, edit a contact in the
Favorites list, nor edit any contact from the Directory or Favorites list before calling.
ReadWrite: You are able to add a contact to the Favorites list, edit a contact in the
Favorites list, and edit a contact from the Directory or Favorites list before calling.

UserInterface Security Mode

This setting allows you to prevent important system information from being exposed in the
user interface (drop down menu and Settings panel), for example the contact information
and IP addresses of the video system, touch controller, and UCM/VCS registrars. It is
important to note that such information is not hidden when navigating further into the
Settings panel.
If you want to fully prevent that people without administrator rights can see the contact
information, IP addresses, MAC address, serial number, and software version, you must
also set the UserInterface SettingsMenu Mode to Locked, and of course have a passphrase
for all user accounts with administrator rights.
Requires user role: ADMIN
Default value: Normal
Value space: Normal/Strong
Normal: IP addresses and other system information are shown on the user interface.
Strong: Contact information and IP addresses are not displayed on the user interface
(drop down menu and Settings panel).
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance

UserInterface SettingsMenu Mode

The Settings panel in the user interface (Touch 10 or on-screen) can be protected by the
video system's admin password. If this password is blank, anyone can access the settings
in the Settings panel, and for example factory reset the system. If authentication is enabled,
all settings that require authentication have a padlock icon. You will be prompted to enter
the administrator's user name and passphrase when you select the setting. Some settings
do not require authentication, they do not have a padlock icon.
Requires user role: ADMIN
Default value: Unlocked
Value space: Locked/Unlocked
Locked: Authentication with administrator's username and passphrase is required.
Unlocked: No authentication is required.

UserInterface SettingsMenu Visibility

Choose whether or not to show the system name (or contact information) in the upper left
corner of the user interface, and the associated drop down menu and Settings panel.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Hidden
Auto: Shows the system name with drop down menu and Settings panel in the upper left
corner of the user interface.
Hidden: Doesn't show the system name with drop down menu and Settings panel in the
upper left corner of the user interface.

UserInterface Sounds Mode

Not applicable in this version.
Requires user role: ADMIN, USER
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
150
Administrator Guide
System settings System settings Appendices