Serialport Settings; Serialport Baudrate; Serialport Loginrequired; Serialport Mode - Cisco TelePresence SX20 Quick Set Administrator's Manual

For small to medium-size meeting rooms
Hide thumbs Also See for TelePresence SX20 Quick Set:
Table of Contents

Advertisement

Cisco TelePresence SX20 Quick Set
Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port (connection via USB and RS-232 adapter).
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.

SerialPort BaudRate

Define the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 38400.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1;
Flow control: None.
Requires user role: ADMIN
Default value: 115200
Value space: 9600/19200/38400/57600/115200
Set a baud rate from the baud rates listed (bps).

SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15329.03 SX20 Administrator Guide CE8.2, JUNE 2016.
Configuration
Peripherals
Maintenance
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
116
Administrator Guide
System settings
System settings
Appendices

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence sx20

Table of Contents