Storage And Recall - Tenma 72-14520 Instructions Manual

• When the setting is set to trace mode with the F3 key, the multi-purpose control can
adjust both AY and BY at the same time.
• On the upper left corner of the display area, BY and AY are represented by the
current position of the cursor BY and AY respectively. BY-AY indicates the voltage
difference between the two cursors.

STORAGE AND RECALL

• With the storage function, you can save the oscilloscope's settings, waveforms, and
screen images to the oscilloscope's internal or external USB storage devices, and
recall the saved settings or waveforms anytime.
• Press the STORAGE key to enter the storage function setting interface.
• Only FAT format USB storage devices are supported. It is also not compatible with
NTFS format.
Storage Setting and Recall
• Press the STORAGE button to enter the storage setting menu. Then press the F1
key and select the type as settings.
Functions
Type
Disk
File name
Save
Callback
• You can only select a USB device when external storage devices are plugged in.
• Callback only works when previously saved files on the drive have the correct file
names.
Options
Storage
Settings
DSO Data saved on the oscilloscope
USB Data saved on USB drive
File name can be chosen using the multi-purpose control.
Names can be chosen from set001 to set225
Saves the setting to the selected destination
Recalls the saved settings and returns the oscilloscope to
the previously saved state
Description
37