Table of Contents
Advertisement
Multi-purpose Control
•
Press the DISPLAY button and press F3 or F4 to select the
brightness options, then use the control to adjust the brightness.
•
Press the control to confirm the setting.
•
During menu operations the control can be used to select various
sub menu options, then press it again to confirm selection.
Function Keys
•
MEASURE: Measure setting menu: can set
measure source to all parameters, custom
parameters, perform measurement statistics,
select measurement indicators, etc.
•
ACQUIRE: Sampling setting menu to set up
acquisition mode and storage.
•
STORAGE: Storage interface can select different types of storage and waveform
settings, which can be stored internally or through USB device.
•
CURSOR: Cursor measurement menu can measure waveform's time and voltage
manually with cursor. Press F1 to turn on or off.
•
DISPLAY: Select display settings, such as display type, format, duration, grid
brightness, and waveform brightness.
•
UTILITY: The utility menu can choose between some less commonly used settings
such as self-calibration, system information, language, menu display, waveform
recording, pass test, square wave output, frequency meter, system upgrades, back-
light brightness, output, etc. using relevant function button.
•
DEFAULT: Restore to factory default settings.
USER INTERFACE
1
12
2
3
4
7
8
5
9
6
6
11
10
Hide quick links:
Advertisement
Table of Contents
