Tenma 72-14520 Instructions Manual page 45

DC Gain Accuracy
DC Offset accuracy
Channel Separation DC to maximum bandwidth: >40 dB
Timing Scale
Timing Accuracy
Delay
Timebase
Waveform Capture
Rate
Sampling Mode
Real-time sampling
rate
Acquisition Mode
Average Value
Waveform
Interpolation
Storage Depth
Trigger level range
Trigger mode
Trigger hold off
range
High frequency
suppression
Low frequency
suppression
Noise suppression
Trigger sensitivity
≤±4% (Sampling or average sampling method)
≤±4% (Sampling or average sampling method)
5ns/div ~ 50s/div (1-2-5 base)
2ns/div ~ 50s/div (1-2-5 base) (UPO2202CS)
1mV/div~20 V/div (1-2-5 base)
Pre-trigger (Negative Delay): ≥1 Screen Width Post-trigger
(Positive Delay): 1 s~50 s
YT, XY, ROLL
50,000 wfms/s
5ns/div ~ 50s/div (1-2-5 base)
2ns/div ~ 50s/div (1-2-5 base) (UPO2202CS)
GS/s(Single Channel), 500MS/s(Dual Channel), 250MS/s(Quad Channel)
1GS/s(Single Channel), 500MS/s(Dual Channel) (UPO2202CS)
Sampling, peak detection, high resolution, envelope, and average
After all channels reach N times sampling, N times in 2, 4, 8, 16, 32, 64,
128, 256, 512, 1024, 2048, 4096, and 8192
sin(x)/x
Auto, 28kpts, 280kpts, 2.8Mpts, 28Mpts
Internal: Centre of the screen ± 8 grids External: ± 0.8V
Automatic, normal, single
100ns~10s
50kHz
5kHz
Reduce Noise Waveform
(10mV/div~20 V/div, DC coupling trigger sensitivity reduced by 2 times)
≤1div
Horizontal
Sampling
Trigger
45