Tenma 72-14520 Instructions Manual page 35

User Defined Parameters
• Press the MEASURE button to enter the automatic measurement menu. Then
press the F1 key to select the source of the measurement.
• The user defined parameter interface is accessed by pressing F4.
• Adjust the parameters with the multi-purpose control, press the multi-purpose
control to confirm selection. For every selected parameter, a * symbol will appear in
front of the parameter.
• F3 can be pressed to turn off user defined parameter selection menu and the
parameters will be display at the bottom of the screen.
• For convenience and immediate view of these parameters, up to 5 parameters can
be defined at the same time.
• To open the measurement statistical function press the F4 key.
User Defined Parameter Selection
User Defined Parameter Statistics
35