Table of Contents
Advertisement
5
Unscrew and remove the power to the sen-
sor.
The flowmeter includes several parts, it is advis-
able to replace the gaskets every time it is fully
inspected.
Check that there is no limestone in the Ventolino
inlet grid, remove the 3 screws that hold the
cover and check that there is nothing to obstruct
the smooth operation.
To remove the filter screen, in the event that it is
particularly clogged, simply use a wire to push
the retina, if necessary a common clip is also
sufficient.
7.14
SERVICE MANUAL
Fig. 221
Fig. 222
Fig. 223
Fig. 224
Edition 01 of 08/2017
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the BLACK EAGLE VA388 and is the answer not in the manual?
Questions and answers
good afternoon i have black eagle whenever i go to program dose only one icone apear there for hot water why other not
Only one icon for hot water appears when programming the Victoria Arduino VA388 Black Eagle because the display shows the icon for the Dose programming function selected and the value already programmed. This allows the user to adjust or confirm the hot water dose setting.
This answer is automatically generated