Machine Configuration - Victoria Arduino BLACK EAGLE VA388 Service Manual

8.9

MACHINE CONFIGURATION

The control units of the VA388 are the same for
all versions (2-3 groups, steam nozzle automatic
and not, etc..), so when you change a control
you must set the parameters that characterize
the machine
The control units differ for the VA388 Volumetric
version and the VA388 Gravimetric version.
Through the interface it is possible to configure
the type of machine: DIGIT/T3, number of units,
steam nozzle etc.
1 Enter the "Technical Settings" menu.
2 Select "Information".
The screen will show the following information.
3 Keep the wash key PRESSED
screen changes.
8.18
SERVICE MANUAL
Fig. 309
Fig. 310
Fig. 311
Fig. 312
until the
Language Dose Temperature Key and display
programming setpoint
Energy Pour Alarms
saving count
Impostazioni tecniche Technical settings Technic Menu Principale
Date and t Date and time Date and t ime ime ime Information In In In n n nformat format tion tion Up Update Up p pdate
firmware firm mware m
Pa Password assword
Automati Automatic ic
se setting etting
wash. Cycle wash. Cy ycle
Menu Principale
Avr VA TFT
Release firmware: 0.03
Avr VA V
Release firmware: 0.04
Internal temperature: 28°C
Technical settings
Avi VA TFT
Release firmware: 0.14
VA T3 V
Release firmware: 0.23
Internal temperature: 20°C
Edition 01 of 08/2017
Main Menu
settings
Technical
settings
g
M Maint Maint