Victoria Arduino BLACK EAGLE VA388 Service Manual page 10

1.3 SAFETY REGULATIONS
This book is an integral and essential part of
the product and must be given to the user.
Read this book carefully. It provides important
information concerning safety of installation,
use and maintenance. Save it carefully for
future reference.
All illustrations contained in this manual are
meant for information purposes only.
Your machine may differ slightly from the one
shown here.
Victoria Arduino reserves the right to make any
changes to products and the manual without
the need for any updates to previous products
and manuals.
After removing the packaging, verify appli-
ance integrity. In case of doubts, do not use
the appliance, but consult a qualified techni-
cian. Packaging items which are potentially
dangerous (plastic bags, polystyrene foam,
nails, etc..) must be kept out of children's
reach and must not be disposed of in the
environment.
RISK OF POLLUTION
Fig. 3
The machine is can be installed in staff
kitchen areas in shops, offices and other
working environments, farm houses by clients
in hotels, motels and other residential type
environments bed and breakfast type environ-
ments.
Before connecting the appliance make sure
the rating plate data correspond with the
mains. This plate is on the front panel at the
top right hand side of the appliance. The appli-
ance must be installed by qualified technicians
in accordance with current standards and
manufacturer's instructions.
The appliance must be installed according to
the applicable federal/national/local stand-
1.4
SERVICE MANUAL
ards (codes) concerning the hydraulic sys-
tems including back-flow devices. Owing to
the above, the hydraulic connections must be
carried out by a skilled technician. The war-
ranty will be rendered null and void in case the
features of the power supply do not match the
plate data.
The manufacturer is not liable for any damage
caused due to failure to ground the system.
For the electrical safety of the appliance, it is
necessary to equip the system with the proper
grounding. This must be carried out by a quali-
fied electrician who must ensure that the elec-
tric power of the system is sufficient to absorb
the maximum power input stated on the plate.
Fig. 4
The electrician with the apposite qualification
certificate must make sure that the section
of the system cables is suitable to the power
absorbed by the machine.
The use of adapters, multiple sockets or
extensions is strictly forbidden. If they prove
necessary, call a fully qualified electrician.
For appliances powered at 220-230 V, the
maximum impedance from the mains must be
no higher than 0.37 Ohm.
When installing the device, it is necessary to
use the parts and materials supplied with the
device itself.
Should it be necessary to use other parts,
the installation engineer needs to check their
suitability for use in contact with water for
human consumption.
The machine must be installed in compli-
ance with the local health standards in force
for plumbing systems. Therefore, contact an
authorized plumber.
The device needs to be supplied with water
that is suitable for human consumption and
compliant with the regulations in force in the
place of installation. The installation engineer
needs confirmation from the owner/manager
of the system that the water complies with the
requirements and standards stated above.
Edition 01 of 08/2017