Options; Scale; Medibus - Dräger Babytherm 8004 Instructions For Use Manual

Options

– Height adjustment
– One or two swivel cabinets
– Side panels (150 mm or 230 mm)
– Infusion holder
– Phototherapy
– Bed canopy
– Swivel tray
– RS 232 interface

Scale

It is designed to determine the weight of the patient
with the bed in a horizontal or inclined position.

MEDIBUS

Software protocol for the transfer of data between
Babytherm 8004/8010 and an external medical or
non-medical device (e.g., patient monitors or
computers for data management systems) via an
RS 232 port, see "MEDIBUS for Dräger Pediatric
Devices" (9029205).
WARNING
All transferred data are for information only
and should not be used as basis for
diagnostic or therapeutic decisions.
WARNING
Risk of injury for patients and users
All systems consisting of medical devices and
other electrical equipment and which are not
computers, printers, etc., must be assembled
by service personnel.
The system must meet the requirements of the
IEC/EN 60601-1-1 and IEC/EN 60601-1-2
standards.
Instructions for use Babytherm 8004/8010
Application
17