Dräger Babytherm 8004 Instructions For Use Manual page 28

Preparation
To ensure stability*, observe the following
restrictions when using accessories:
– Do not exceed a maximum patient weight of
8 kg
– Observe a maximum weight limit of 20 kg for
the shelf and a maximum mounting height of
40 cm above the base plate
– Maximum loading of 2.4 kg for a swivel cabinet,
corresponding to a maximum total weight of
9 kg
– Mount swivel cabinets on opposite sides, if
present.
When attaching one-sided stand column
accessories without swivel cabinets
Maximum permissible one-sided accessory load on
the stand column:
– 5 kg at a height of 200 cm and at a distance of
20 cm
When attaching swivel cabinets and stand
column accessories
1 For one-sided mounting of the swivel cabinet
Maximum permissible one-sided accessory
load on the stand column:
– 1 kg at a height of 200 cm and at a distance
of 20 cm
or
– 2 kg at a height of 130 cm and at a distance
of 10 cm
Example:
1.5 kg (approx. 1 L of infusion liquid including
bracket) at a distance of 20 cm from the stand
column, at a height of 180 cm corresponds to a
tilting moment of approx. 7 Nm (at an inclination
of 10°).
* IEC 60601-1 tilt stability ensured up to an inclination of
10°
28
2 For opposite/diagonal mounting of swivel
cabinets
Maximum permissible one-sided accessory
load on the stand column:
– 2.5 kg at a height of 200 cm and at a
distance of 20 cm
or
– 4.5 kg at a height of 130 cm and at a
distance of 10 cm
3 For same-sided mounting of swivel cabinets
Maximum loading of 2.4 kg = maximum total
weight of 9 kg per cabinet
– No one-sided accessory load on the stand
column
– Maximum loading of the shelf restricted to
2.5 kg
Maximum load
Individual wheel load
Tilting moment
Lifting columns/standard
housing
of which
Weight of patient < 8.0 kg
Swivel cabinet < 2.4 kg Observe diagonal
Shelf < 20 kg Observe maximum
Stand column < 5.0 kg Attach accessory
Standard rail on 2 kg
stand column
Standard rail, rear 5 kg
Instructions for use Babytherm 8004/8010
< 100 kg
< 25 Nm
< 50 kg
mounting position
mounting height of
140 cm
loads as low and as
close to the stand
columns as possible
and avoid one-sided
loading