Front Panel I/O & Functions - Vecow SPC-6000 User Manual

2.2 Front Panel I/O & Functions
In Vecow's SPC-6000 series family, all I/O connectors are located on the front panel.
Most of the general connections to the computer device, such as Display port, USB
3.2, USB 2.0, LAN Jack, Audio Jack and DVI-I, are placed on the front panel.
2.2.1 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power off the
system. Press the Reset Switch for a few seconds, and then reset will be enabled.
2.2.2 Power Button
The Power Button is a non-latched switch with dual color LED indication. It indicates
power status : S0, S3 and S5. More detail LED indications are listed as follows :
LED Color
Solid Blue
Solid Orange
To power on the system, press the power button and then the Blue LED is lightened.
To power off the system, you can either command shutdown by OS operation or
just simply press the power button and then the Orange LED is lightened. If system
error, you can just press the power button for 4 seconds to shut down the machine
directly. Please do note that a 4-second interval between each 2 power-on/power-
off operation is necessary in normal working status. (For example, once turning off
the system, you have to wait for 4 seconds to initiate another power-on operation)
©Vecow SPC-6000 User Manual
Indication
S0 System working
S3, S5 Suspend to RAM, System off with standby power
System Status
GETTING TO KNOW YOUR SPC-6000 7