Intel core i7/i5/i3 soc whiskey lake ultra-compact fanless embedded system, 2 gige lan, 4 10g usb 3.1 gen 2, 2 com, 9v to 48v, ignition control, -40 degrees c to 85 degrees c (109 pages)
This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation, nor for any infringements upon the rights of third parties, which may result from such use.
Page 4
Order Information Part Number Description MTC-4021- 21.5" Fanless Multi-Touch Computer, 6 GbE LAN with 4 PoE ® PoE650U 2 SIM, 4 COM, 4 USB, Onboard Intel Core™ i7-5650U MTC-4021- 21.5" Fanless Multi-Touch Computer, 6 GbE LAN with 4 PoE ®...
Optional Accessories Part Number Description DDR3L8G Certified DDR3L-1600 8G RAM DDR3L4G Certified DDR3L-1600 4G RAM PWA-120W 120W, 24V, 90VAC to 264VAC Power Adapter with 3-pin Terminal Block PWA-160W-WT 160W, 24V, 85VAC to 264VAC Power Adapter with 3-pin Terminal Block, Wide Temperature -30°C to +70°C Panel-Mount Panel Mount Kit VESA Stand...
1.3.2 Specifications of MTC-4021-2G 1.4 Supported CPU List 1.5 Mechanical Dimensions 1.5.1 Dimensions of MTC-4021-PoE 1.5.2 Dimensions of MTC-4021-2G CHAPTER 2 GETTING TO KNOW YOUR MTC-4021 2.1 Packing List 2.2 I/O Functions 2.3 Main Board Expansion Connectors 2.4 Main Board Jumper Settings CHAPTER 3 SYSTEM SETUP 3.1 How to Open Your MTC-4021...
Page 7
CHAPTER 4 BIOS AND DRIVER 4.1 BIOS Settings 4.2 Main Menu 4.3 Advanced Function 4.4 Chipset Function 4.5 Boot Function 4.6 Save & Exit APPENDIX A : GPIO and WDT Functions...
GENERAL INTRODUCTION 1.1 Overview MTC-4021 Series Fanless Multi-Touch Computer is a 21.5 inch all-in-one fanless Multi-Touch Computer for Internet of Thing (IoT) and/ or Industry 4.0 applications with excellent performance and trusted reliability. Powered by 5th generation ® Intel Core™ i7/ i5/ i3 U-Series SoC (Broadwell-U) engine, dual DDR3L 1333/ ®...
1.3 Product Specification 1.3.1 Specifications of MTC-4021-PoE Panel Panel Type TFT LCD Active Area 21.5” (16 : 9) Max Resolution 1920 x 1080 (Full HD) Display Color 16.7M (RGB 8-bit) Backlight LED Backlight Brightness (cd/m2) 250 (Optional, up to 1200) Viewing Angle 178°/178°...
Page 10
Audio 1 Mic-in, 1 Line-out Display • DVI-D : Up to 1920 x 1080 @ 60Hz • DisplayPort : Up to 3840 x 2160 @ 60Hz Power, HDD CFast 1 External CFast Socket, Push-in/ Push-out Ejector SIM Card 2 External SIM Card Socket Expansion Mini PCIe 2 Mini PCIe Socket :...
• 20G, Half-sine, 11ms Vibration • IEC 60068-2-64 • Non-operation : 10Hz to 200Hz, 1.5Grms, X, Y, Z, 30 mins each Axis CE, FCC 1.3.2 Specifications of MTC-4021-2G Panel Panel Type TFT LCD Active Area 21.5” (16 : 9) Max Resolution...
Page 12
Audio 1 Mic-in, 1 Line-out Display • DVI-D : Up to 1920 x 1080 @ 60Hz • DisplayPort : Up to 3840 x 2160 @ 60Hz Power, HDD CFast 1 External CFast Socket, Push-in/ Push-out Ejector SIM Card 2 External SIM Card Socket Expansion Mini PCIe 2 Mini PCIe Socket :...
Page 16
Suspend to RAM, System off with standby Solid Orange S3, S5 power To power on MTC-4021, press the power button and then the blue LED is lightened. To power off MTC-4021, you can either command shutdown by OS operation, or just simply press the power button.
Page 17
CFast socket cover before installing a CFast card. The MTC-4021 does not support the CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove power source first before inserting or removing the CFast card.
Page 18
2.2.6 DisplayPort DC-IN 6V~36V CFast SIM 2 SIM 1 RESET LAN6 LAN5 LAN4 LAN3 COM4 COM3 COM2 COM1 USB2.0 USB3.0 DVI-D LAN2 LAN1 Onboard DisplayPort connection supports up to 3840 x 2160 resolutions at 60 Hz. GETTING TO KNOW YOUR MTC-4021...
Page 20
Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled. Using suitable RJ-45 cable, you can connect MTC-4021 system to a computer, or to any other devices with Ethernet connection, for example, a hub or a switch. Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot functions.
5.1 channel HD audio and fully complies with Intel High Definition Audio (Azalia) specifications. To utilize the audio function in Windows platform, you need to install corresponding drivers for both Intel Broadwell-U chipset and Realtek ALC892 codec. GETTING TO KNOW YOUR MTC-4021...
2.3 Main Board Expansion Connectors 2.3.1 Front View of MTC-4021 Main Board With Connector Location BIOS CN15 CN17 CN16 CN19 Battery CON1 CN18 JP10 JP11 2.3.2 Rear View of MTC-4021 Main Board With Connector Location PLX-8608 GETTING TO KNOW YOUR MTC-4021...
Page 26
2.3.4 CON1 (LVDS), J2 CON1 MTC-4021 supports dual-channel 24-bit LVDS display, up to 1920 x 1200 pixels resolution. The pin assignments of CON1 are listed in the following table: Pin No. Definition Pin No. Definition Pin No. Definition PANEL_VDD TXO0-...
Page 27
CN17 CN19 There are 2 onboard high performance Serial ATA III (SATA III) on MTC-4021. It supports higher storage capacity with less cabling effort and smaller required space. The pin assignments of CN17 and CN19 are listed in the following table: Pin No.
Page 28
2.3.6 J1, J3 : SATA Power Connector The MTC-4021 also equip with 2 SATA power connector. It supports 5V (Up to 2A) and 12V (Up to 1A) current to the hard drive or SSD. The pin assignments of J1 and J3 are listed in the following table: Pin No.
Page 29
2.3.7 J4 : Internal USB The MTC-4021 main board provide one expansion USB port using plug-and- play for Dongle Key or LCD touch Panel. The USB interface supports 480 Mbps transfer rate which comply with high speed USB specification Rev. 2.0.
Page 30
1. When a Mini PCIe device is inserted, its Pin-43 forces the respective pin on the socket to ground, or logic 0. MTC-4021 using JP11 Pin-43 status designed for switching between mSATA drive and Mini PCIe device.
Page 32
The pin assignments of CN16 are listed in the following table: Pin No. Signal Name Pin No. Signal Name WAKE# +3.3Vaux Reserved Reserved +1.5V CLKREQ# UIM_PWR UIM_DATA REFCLK- UIM_CLK REFCLK+ UIM_RESET UIM_VPP Mechanical Key Reserved Reserved reserved PERST# PERn0 +3.3Vaux PERp0 +1.5V GETTING TO KNOW YOUR MTC-4021...
Page 33
2.3.10 Battery Battery The MTC-4021’s real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team.
Page 34
Pin No. Function Pin No. Function LAN2_SDP0 LAN2_SDP3 LAN2_SDP1 LAN2_SDP2 2.3.12 CN15 : +12V_SB Output CN15 The pin assignments of CN15 are listed in the following table: Pin No. Function Pin No. Function +12V_SB +12V_SB GETTING TO KNOW YOUR MTC-4021...
2.4 Main Board Jumper Settings 2.4.1 Front View of MTC-4021 Main Board with Jumper Location The figure below is the top view of the MTC-4021 main board which is the main board used in the MTC-4021 Series system. It shows the location of the jumpers.
Page 38
2.4.4 JP6 CMOS/ME CMOS Header Header Normal Normal Clear CMOS Clear ME 2.4.5 JP7 External USB3.0/2.0 Power Select Header Power Header Power +5V Standby Power +5V System Power GETTING TO KNOW YOUR MTC-4021...
Page 42
Step 2 Remove 2pcs #4-40 screws (circled in red) from I/O. Step 3 Now you can take off the back cover. Please do remove the back cover carefully. HARDWARE INSTALLATION...
Page 44
Step 2 Remove 2pcs #4-40 screws (circled in red) from I/O. Step 3 Now you can take off the back cover. Please do remove the back cover carefully. HARDWARE INSTALLATION...
Page 48
Step 3 Put Antenna cable connector into the hole on back cover. Step 4 Fasten the washer 1, washer 2 and washer 3 on Antenna cable connector. HARDWARE INSTALLATION...
3.6 Installing SSD/ HDD Step 1 Remove 2pcs M3x4 screws of SSD/ HDD Tray from back cover. Step 2 Take SSD/ HDD Tray and face the bracket side up. HARDWARE INSTALLATION...
BIOS AND DRIVER 4.1 BIOS Settings The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI) Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI auto- configuration utility, LAN, EEPROM information, and Serial port support. The BIOS setup program is accessed by pressing the <Del>...
4.3 Advanced Function 4.3.1 ACPI Setting Figure 4 3-1: ACPI Setting setup screen Enable ACPI Auto Configuration This system support ACPI function as auto process. You should Enable / Disable that depend as your O.S. Enable Hibernation It is able to use Hibernate function if O.S support. But some O.S maybe not effective with this function.
4.3.3 SATA Configuration Figure 4-3-3: SATA Configuration setup screen SATA Controller(s) Enables or Disables integrate SATA controller for Storage device use. SATA Mode Selection Determines how the SATA transfer mode for operate. Here has two options for choice [AHCI] / [RAID]. Serial ATA Port 0 to Port 3 This system offers four SATA port for SATA device connection.
4.3.5 Serial Port 1 Configuration Figure 4-3-5: Serial Port 1 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...
4.3.7 Serial Port 3 Configuration Figure 4-3-7: Serial Port 3 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...
4.4 Chipset Function Figure 4-4: Chipset Function Setup screen 4.4.1 WOL Configuration Figure 4-4-1 : Network Setup screen PCH LAN Controller Enable or Disable on board network device. Wake on LAN Enable or Disable integrated LAN to wake the system. BIOS AND DRIVER SETTING...
4.6 Save & Exit Figure 4-6 Save & Exit Setup screen Save Changes and Exit / Save Changes and Reset Choose this setting to exit the BIOS setup program and save changes to the BIOS NVRAM memory. Make sure you select this in order to keep your changes.
APPENDIX B : GPIO and WDT Functions B.1 Function Description The WDT are using internal Super I/O function. However, you must entry super I/O configuration mode to set it. Super I/O special address port = 0x2E Super I/O special data port = 0x2F GPIO Logical device is 0x07 B.2 Entry Functions 1.
Page 72
Power-on and boot to Win7 64-bit Idle Status : Run 100% CPU usage CPU usage less 3% Current Consumption Current Consumption i7-5650U 2.200A 13.20W 3.600A 21.60W i7-5650U 1.430A 12.87W 2.250A 20.25W i7-5650U 1.070A 12.84W 1.610A 19.32W i7-5650U 0.610A 14.64W 0.900A 21.60W i7-5650U 0.530A...