Front Panel I/O & Functions - Vecow SPC-5000 User Manual

2.2 Front Panel I/O & Functions
2.2.1 SPC-5000/5100 Front I/O & Functions
In Vecow's SPC-5000/5100 series family, all I/O connectors are located on the
front panel. Most of the general connections to the computer device, such as
audio, USB3.1, DVI-D, LAN Jack, and DisplayPort, are placed on the front panel.
2.2.1.1 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power off
the system. Press the Reset Switch for a few seconds, then reset will be enabled.
2.2.1.2 Power Button
The power button is a non-latched switch. In case of system halts, you can press
and hold the power button for 4 seconds to compulsorily shut down the system.
Please note that a 4 seconds interval is kept by the system between two on/off
operations (i.e. once turning off the system, you shall wait for 4 seconds to initiate
another power-on operation).
©Vecow SPC-5000 User Manual
LAN LAN
LAN LAN
DVI DP
On | Off
IGN
DVI DP
On | Off
IGN
GETTING TO KNOW YOUR SPC-5000 13