Vecow SPC-6000 User Manual page 59

4.4.2.2 SATA Configuration
Figure 4-4-2-2 : SATA Devices Settings
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controllers operate.
Software Feature Mask Configuration
RST Legacy OPROM/RST UEFI driver will refer to the SWFM configuration to
enable/disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port.
Port n
Enable or disable SATA port.
Hot Plug
Designates this port as Hot Pluggable.
External
External
Spin Up Device
If enabled for any of ports staggered spin up will be performed and only the drives
which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
©Vecow SPC-6000 User Manual BIOS SETUP 52