Vecow SPC-6000 User Manual page 21

2.4.5 DIMM1 : DDR4 Slot
There is a DDR4 channel onboard, support DDR4 3200, max 32GB.
2.4.6 JUSB1 : Internal USB 2.0 Connector
The SPC-6000 series main board provides two expansion USB ports. The USB
interface supports 480Mbps transfer rate which comply with high speed USB
specification Rev. 2.0. The USB interface is accessed through one 10-pin JST 1.0mm
connector. You will need an adapter cable if you use a standard USB connector.
The adapter cable has a 10-pin connector on one end and a USB connector on the
other. The pin assignments of JUSB1 and is listed in the following table :
10
©Vecow SPC-6000 User Manual
DIMM1
Pin No. Definition
1 USB_VCC
3 USB_VCC
5 USB_D_6P
1
7 USB_D_7P
9
JUSB1
Pin No.
2
4
6
8
GND 10
GETTING TO KNOW YOUR SPC-6000
Definition
USB_VCC
USB_D_6N
USB_D_7N
GND
GND
14