Vecow SPC-6000 User Manual page 54

4.3.14 Network Stack Configuration
Figure 4-3-14 : Network Stack Configuration
Network Stack
Enable/Disable UEFI Network Stack.
Ipv4 PXE Support
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will
not be available.
Ipv4 HTTP Support
Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support
will not be available.
Ipv6 PXE Support
Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will
not be available.
Ipv6 HTTP Support
Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support
will not be available.
PXE boot wait time
Wait time to press ESC key to abort the PXE boot. User either +/- or numeric
keys to set the value.
Media detect count
Number of times presence of media will be checked. Use either +/- or numeric
keys to set the value.
4.3.15 NVMe Configuration
Figure 4-3-15 : NVMe Configuration
Display NVMe Controller and drive information.
©Vecow SPC-6000 User Manual BIOS SETUP 47