Intel core u-series processor whiskey lake ultra-slim fanless embedded system, 4 gige lan with 2 poe+, 4 usb, 4 com, 9v to 50v dc-in, -40 degrees c to 75 degrees c (93 pages)
Intel core i7/i5/i3 soc whiskey lake ultra-compact fanless embedded system, 2 gige lan, 4 10g usb 3.1 gen 2, 2 com, 9v to 48v, ignition control, -40 degrees c to 85 degrees c (109 pages)
Intel xeon/core i7/i5/i3 fanless gpu computing system with nvidia geforce gtx 1070/1060/1050/1030, pci/pcie expansion (114 pages)
Summary of Contents for Vecow ABP-2000
Page 1
USER USER ABP-2000 Manual Manual Fanless Advanced Box PC, 2 LAN, 2 HDMI, 6 COM Onboard Intel Atom™ Bay Trail E3845 Quad Core Processor ® 1.0.3 Edition 05/01/2016 All information is subject to change without notice.
This manual is intended to be used as a practical and informative guide only and is subject to change without prior notice. It does not represent commitment from Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation, nor for any infringements upon the rights of third parties, which may result from such use.
4.2.7 Serial Port 6 Configuration 1.3 Supported CPU List 4.2.8 PPM Configuration 1.4 Mechanical Dimension 4.2.9 CPU Configuration 4.2.10 IDE Configuration Getting to Know Your ABP-2000 4.3 Chipset Function 4.3.1 Display Configuration 2.1 Packing List 4.3.2 Power Loss Configuration 2.2 Front Panel I/O Functions 4.4 Boot Function...
232/422/485, 2 GbE LANs, one 2.5” SATA 3Gp/s SSD/HDD tray, 3 USB 3.0 ports, 2 USB 2.0, and 2 miniPCI-express. ABP-2000 series is in fanless smart form factor and capable of operating under wide temperatures from -25°C to +70°C for harsh environments.With cutting-edge graphics and computing technologies, ABP-2000 series enable to present high quality resolution 3D display as low power consumption.
1.2.3 Specifications of Vecow ABP-2015 1.3 Supported CPU List System Vecow ABP-2000 series is based on Intel® Atom™ Bay Processor Intel® Atom™ Valleyview (Bay Trail) Processor (E3815 1.46GHz) Chipset Valleyview SoC Trail platform and accepts the following Bay Trail-I Family Memory 1 DDR3L 1600 SODIMM, Max.
Getting to Know Your ABP-2000 257 (10.1”) 2.1 Packing List Item Description ABP-2000 series fanless controller (According to the configuration you order, the system may pre-install SSD/HDD and DDR3L SO-DIMM. Please verify these items if necessary.) (5.6”) Accessory box, which contains •...
1000 Mbps E_TX+ MDI0_P To turn on the ABP-2000 series, press the power button E_TX- MDI0_N and the blue LED is lighted up.To turn off the ABP-2000 E_RX+ MDI1_P series, you can either issue a shutdown command in ---- MDI2_P OS, or just simply press the power button.
VGA monitor. To ensure that the monitor image remains clear, be The ABP-2000 series comes with 3 USB 3.0 hosts sure to tighten the monitor cable after connecting it to on the front panel. These USB 3.0 ports allow data the ABP-2000.
Each bit can be configured for DO or DI you can find the setting in BIOS. The ABP-2000 series comes with 2 USB 2.0 hosts on the front panel. The USB interface supports Plug and Play, which enables you to connect or disconnect...
Serial Port 5 and 6 default setting are RS-232, if you want to use RS-422 or RS-485, you can The ABP-2000 series offers 9 to 28 VDC power input, find the setting in BIOS. ABP-2845 and ABP-2015 are Terminal Block, ABP-2045 is DC Jack connector.
2.4 Main Board Expansion Connectors The figure below is the bottom view of the ABP-2000 series main board. The figure below is the top view of the ABP-2000 series main board. It shows the location of the connectors. Figure 2.4.1 Internal Connectors and Jumpers...
2.5mm connector to provide +5V/+12V power to the LCD display. Pin No. Definition The ABP-2000 series is equipped with one SATA power +12V connector. It supply 5V (1A max.) and 12V (1A max) +12V current to the hard drive or SSD.
3.3Vaux 2.4.7 Battery 2.4.6 CN29 GPIO The ABP-2000 series’ real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR2032 These pin headers can be used as a backup for the The 190mAh lithium battery. It is recommended that you not ABP-2000 series offers 8 programmable I/O within TTL replace the lithium battery on your own.
2.5 Main Board Jumper Setting 2.4.8 GPS Module The figure below is the top view of the ABP-2000 series main board. It shows the location of the jumpers. You may configure your card to match the needs of The ABP-2000 series offers a u-blox NEO-7 GPS/GNSS your application by setting jumpers.
Page 32
//It will return a BYTE value. GPIO & WDT Function D.Start to Access the ABP-2000 series GPIO port The GPIO& WDT are using internal Super IO function. However, you must entry super I/O configuration mode to Please refer to source code for set_data() and get_data() set it.