Front Panel I/O & Functions - Vecow EIC-1000 User Manual

2.2 Front Panel I/O & Functions
In Vecow EIC-1000 series, all of the I/O connectors are located on the front
and rear panels. Most of the general connections to computer devices, such as
USB, LAN, Digital Display and COM port are placed on the front panel.
2.2.1 Power Button and LED
The Power Button is a latched switch with LED indication.
To power on the system, press the power button and then the blue power LED
is lightened.
To power off the system, push to release the power button. For Debian OS, you
can also command shutdown by OS operation.
To boot on the system, please press the Power button. To shut down the
system, please press the button again. The blue power LED indicates the
system's power is plugged.
2.2.2 Reset Button
The Reset Button is used to reset the system without powering off the system.
Press the Reset Button for a few seconds, then reset will be enabled.
©Vecow EIC-1000 User Manual GETTING TO KNOW YOUR EIC-1000 9