Vecow SPC-6000 User Manual page 61

4.4.4 SW Ignition Configuration
Figure 4-4-4 : SW Ignition settings.
System power on method
[Normal] System power on by power button.
[Ignition] System power on by ignition pin.
Delay On Timer (Seconds)
The delay time after user trigger ignition on signal (Seconds).
Delay Off Timer (Seconds)
The delay time after user trigger ignition off signal (Seconds).
Force Shutdown Timer (Minutes)
Used to force cut off system power when OS unable gracefully shutdown
system successfully.
Voltage Guard (SPC-6000 is 12v Only)
Voltage Guard enable or disable, only effect on Ignition mode.
Voltage Guard Lower limit value
Voltage Guard lower limit value setting. Range : 9v – 40v.
Voltage Guard higher limit value
Voltage Guard Higher limit value setting. Range : 15v – 50v.
©Vecow SPC-6000 User Manual BIOS SETUP 54