Front Panel I/O & Functions - Vecow RMS-1000 User Manual

2.2 Front Panel I/O & Functions
2.2.1 RMS-1000 Front I/O & Functions
In Vecow's RMS-1000 series family, all I/O connectors are located on the
front panel. Most of the general connections to the computer device, such as
DisplayPort, DVI-D, USB 3.1, audio, LAN Jack, COM port and DC-IN are placed
on the front panel.
2.2.1.1 Power Button
The power button is a non-latched switch. In case of system halts, you can press
and hold the power button for 4 seconds to compulsorily shut down the system.
Please note that a 4 seconds interval is kept by the system between two on/off
operations (i.e. once turning off the system, you shall wait for 4 seconds to initiate
another power-on operation).
LED Color
Green
2.2.1.2 SSD/HDD Tray
There are 2 front-access 2.5" SSD/HDD trays in the front side of RMS-1000.
Just trigger to open the SSD/HDD tray, up to 4TB is available.
2.2.1.3 DisplayPort
Onboard Display Port support auxiliary channel dual mode, connection supports
up to 4096x2304 resolution at 60 Hz.
©Vecow RMS-1000 User Manual
Off | On IGN
10 10
DP DVI
Power Status
Power System power status (on/off)
Off | On IGN
10 10
DP DVI
Off | On
IGN
10 10
DP DVI
COM COM
RST
LAN LAN LAN
System Status
COM COM
RST
LAN LAN LAN
COM COM
RST
LAN LAN LAN
GETTING TO KNOW YOUR RMS-1000
DC-IN
DC-IN
DC-IN
10