This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation or any infringements upon the rights of third parties, which may result from such use.
Page 4
Order Information Part Number Description ® ® EVS-1000, NVIDIA GeForce GT 1030 (2GB GDDR5), 2 GigE EVS-1010 MXM1030 LAN, 1 PCIe x4, 6 USB 3.0, 4 COM, 3 SIM, 32 Isolated DIO ® ® EVS-1000, NVIDIA GeForce GT 1030 (2GB GDDR5), 2 GigE EVS-1001 MXM1030 LAN, 1 PCI, 6 USB 3.0, 4 COM, 3 SIM, 32 Isolated DIO...
Page 5
Order Accessories Part Number Description E3-1268L v5 6th Gen Intel ® Xeon ® E3-1268L v5 Processor (8M Cache, up to 3.40GHz, 35W) ® i7-7700T 7th Gen Intel Core™ i7-7700T Processor (8M Cache, up to 3.80GHz, 35W) ® i7-6700TE 6th Gen Intel Core™...
1.4 Supported CPU List 1.5 Mechanical Dimension 1.5.1 Dimensions of EVS-1000 1.5.2 Dimensions of EVS-1100 CHAPTER 2 GETTING TO KNOW YOUR EVS-1000/1100 2.1 Packing List 2.1.1 Packing List of EVS-1000 2.1.2 Packing List of EVS-1100 2.2 Front Panel I/O & Functions 2.3 Rear Panel I/O &...
NVIDIA Pascal™ architecture supporting up to 8K resolution and 7 independent HD displays, Vecow EVS-1000 delivers not only up to 144% enhanced system performance but 1295% enhanced graphics performance than the one without additional graphics engine; multiple PCIe 3.0 (8GT/s), SATA III (6Gbps), USB 3.0 (5Gbps) and multiple wireless connections deliver seamless high-speed dada conveying.
• Expansion : 1 PCI/PCIe Slot, 3 Mini PCIe/mSATA, optional SUMIT A, B • 10V to 36V DC power input, 80V Surge Protection • Configurable Ignition Power Control 1.3 Product Specification 1.3.1 Specifications of EVS-1000 System ® ® Quad Core Intel Xeon /Core™...
Page 10
Graphics ® • Intel HD Graphics 630/530 Graphics Processor ® ® • NVIDIA GeForce GT 1030 (MXM Module) 6 Display interfaces : • 1 DVI : Up to 1920 x 1200 @ 60Hz Interface • 1 VGA : Up to 1920 x 1200 @ 60Hz •...
2.1.1 Packing List of EVS-1000 Item Description EVS-1000 Expandable Fanless Embedded System (According to the configuration you order, the EVS-1000 series may contain SSD/ HDD and DDR4 SO-DIMM. Please verify these items if necessary.) EVS-1000-Accessory box, which contains • Vecow Drivers & Utilities DVD •...
2.2 Front Panel I/O & Functions In Vecow EVS-1000 series family, all I/O connectors are located on front panel and rear panel. Most of the general connections to computer device, such as USB, LAN Jack, Audio, Display, VGA, DVI-D and any additional storage, are placed on the front panel.
It is implemented by a SATA III Port from C236 PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card. The EVS-1000/1100 does not support the CFast hot swap and PnP (Plug and Play) functions. It is necessary to remove power source first before inserting or removing the CFast card.
Page 18
Power LED/Green : If the LED is solid green, it indicates that the system is powered on. LED Color Indication System Status • On/Off : Storage status, function or not Yellow HDD/CFast • Twinkling : Data transferring Green Power System power status (on/off) GETTING TO KNOW YOUR EVS-1000/1100...
Page 20
There are 4 USB 3.0 connections available supporting up to 5GB per second data rate in the front side of EVS-1000/1100. It is also compliant with the requirements of Speed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
WLAN CFast LAN 2 Mini PCIe Slot/SIM Slot/WLAN LED Mapping Table : Mini PCIe Mini PCIe 1 SIM 1 (CN14) MPCIE1_LED1 Mini PCIe 2 SIM 2 (CN15) MPCIE2_LED1 Mini PCIe 3 SIM 3 (CN16) MPCIE3_LED1 GETTING TO KNOW YOUR EVS-1000/1100...
SIM 2 WLAN CFast LAN 2 There are 2 front-access 2.5" SSD/HDD trays in the front side of EVS-1000/1100. Just trigger to open the SSD/HDD tray, up to 4TB is available. 2.3 Rear Panel I/O & Functions 2.3.1 Power Terminal Block...
Page 26
MB Connector COM Port MB Connector COM 3 CN12 COM 4 CN13 COM 3 & COM 4 MB connector pin out : Pin No. Signal Name Pin No. Signal Name Chassis GND CN12 (COM3) CN13 (COM4) GETTING TO KNOW YOUR EVS-1000/1100...
Page 27
There are 2 USB 3.0 connections available supporting up to 5GB per second data rate in the rear side of EVS-1000/1100. It is also compliant with the requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and Low Speed (LS).
Page 28
Onboard Display Port supports auxiliary channel dual mode, and the connection supports up to 7680 x 3840 resolution at 60Hz. Multi-Stream Transport Display Resolutions Table : Multi-Stream Transport Display Max. Resolution EVS-1000 Two panel displays concurrently 7680 x 3840 @ 60Hz DIO 2 DIO 1 DC-IN...
Page 30
DO Reference Circuit : Sink Mode Device DIO Connector (NPN, Default) 6-48V DC DIO_VDC (Pin 20) DO (Pin11-18) DIO_GND (Pin10,19) Source Mode Device DIO Connector (PNP) 6-48V DC DIO_VDC (Pin 20) DO (Pin11-18) DIO_GND (Pin10,19) GETTING TO KNOW YOUR EVS-1000/1100...
PIN 11 ~ 18 On | Off COM 2 COM 4 COM 3 Optional for PCIe x16 FHHL add on card or PCI card. 2.4 Main Board Expansion Connectors 2.4.1 EVS-1000/1100 Main Board with Connector Location SODIMM_2 CN21 SYS_Fan1 SATA3 SATA1 SODIMM_1...
Page 32
The pin-outs of Miscellaneous port are listed in following table : Group Pin No. Definition HDD_LED_P HDD LED HDD_LED_N FP_RST_BTN_N RESET BUTTON Ground PWR_LED_P POWER LED PWR_LED_N FP_PWR_BTN_P POWER BUTTON Ground GETTING TO KNOW YOUR EVS-1000/1100...
Page 34
Standard, All Form Factor 1x4p Power Header There are 2 HDD power headers on board and each power header supports 2 2.5" SATA HDDs. Pin No. Description Pin No. Description +V12 (Max. 1.5A) Ground Ground +V5 (Max. 4A) GETTING TO KNOW YOUR EVS-1000/1100...
Page 35
2.4.7 Internal USB 2.0 Standard Vertical USB 2.0 Connector The EVS-1000/1100 main board provides one expansion USB port using plug- and-play for Dongle Key or LCD touch Panel. The USB interface supports 480 Mbps transfer rate complied with high speed USB specification Rev. 2.0.
2.5.1 Board Top View of EVS-1000/1100 Main Board With Jumper and DIP Switch The figure below is the top view of EVS-1000/1100 main board which is the main board. It shows the location of the jumpers and the switches. SODIMM_2...
Page 43
2 : OFF 2 : OFF 2 : ON 2.5.2 USB Power Jumper The figure below is the top view of EVS-1000/1100 main board which is the main board. It shows the location of the jumpers and the switches. JP10 Jumper...
Page 44
3 - 4 +12V (0.5A max.) 5 - 6 RI (Default) Pin Header Pin No. Description 1 - 2 +5V (1A max.) COM 4 3 - 4 +12V (0.5A max.) 5 - 6 RI (Default) GETTING TO KNOW YOUR EVS-1000/1100...
2.6.1 Adjust Ignition Control Modes EVS-1000/1100 series provides 16 modes of different power on/off delay periods adjustable via SW2 switch. The default rotary switch is set to 0 in ATX/ AT power mode.
Page 48
Note : 1. DC power source and IGN share the same ground. 2. EVS-1000/1100 supports 10V to 36V wide range DC power input in ATX/AT mode. In Ignition mode, the input voltage is fixed to 12V/24V for car battery scenario.
Page 52
Step 7 Remove five KHS-#6-32 screws. Step 8 Remove the front panel. Step 9 Remove four KHS-#6-32 screws on the rear panel. Step 10 Remove the rear panel. (Be careful the cables for COM and Fan) HARDWARE INSTALLATION...
3.3 Installing DDR4 SO-DIMM Modules Step 1 Put DDR4 RAM module into SO-DIMM slot. Step 2 Make sure the RAM module is well locked by the SO-DIMM slot. HARDWARE INSTALLATION...
3.6 Installing CFast Card Step 1 Remove two F-M3x4 screws on front panel and then take off the cover of CFast card and SIM card sockets. Step 2 Before Inserting CFast, make sure the system power is not plugged. Step 3 Put CFast card into CFast card socket and then push to lock the card. HARDWARE INSTALLATION...
3.9 Installing SSD/HDD Step 1 Loosen and take out SSD/HDD tray. Step 2 Match the screw holes on SSD/HDD tray and the 2.5" SSD/HDD. HARDWARE INSTALLATION...
3.10 Mounting Your EVS-1100/1000 3.10.1 Wall Mount Bracket Step 1 Ensure the screw holes on the right and left side of upper case match the ones on EVS1100/1000 wall mount bracket. Step 2 Fasten four KHS#6-32 screws. HARDWARE INSTALLATION...
4.2 Main Figure 4-2 : BIOS Main Menu The main menu displays BIOS version and system information. There are two options on Main menu. System Date Set the date. Use <Tab> to switch between date elements. System Time Set the time. Use <Tab> to switch between time elements. 4.3 Advanced Figure 4 3 : BIOS Advanced Menu Select advanced tab to enter advanced BIOS setup options, such as CPU...
Page 74
4.3.2 Power & Performance Figure 4 3-2 : Power & Performance 4.3.2.1 CPU – Power Management Control Figure 4 3-2-1 : CPU – Power Management Control Boot performance mode Select the performance state that the BIOS will set before OS handoff. Intel (R) SpeedStep (tm) Allows more than two frequency ranges to be supported.
4.3.4 Trusted Computing Figure 4 3-4 : Trusted Computing Control the TPM device status and display related information if TPM chip is present. 4.3.5 ACPI Settings Figure 4 3-5 : ACPI Settings Enable Hibernation Enables or disables system's ability to hibernate (OS/S4 sleep state). This option may not be effective with some OS.
4.3.8 Hardware Monitor Figure 4-3-8 : Hardware Monitor Settings The IT8786 SIO features an enhanced hardware monitor providing thermal, fan speed, and system voltages' status monitoring. Fan 1 PWM Value FAN 1 PWM Value. Range is 0-255. Default =128, the higher value means more RPM FAN1 PWM example : - 100% ...
Page 82
4.3.15 NVMe Configuration Figure 4-3-15 : NVMe Settings 4.3.16 USB Configuration Figure 4-3-16 : USB Settings Legacy USB Support Enables Legacy USB support. AUTO option disables Legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. XHCI Hand-off This is a workaround for OS-es without XHCI hand-off support.
4.4.1.1 Memory Configuration Figure 4-4-1-1 : Memory Information Displays memory information. 4.4.1.2 Graphics Configuration Figure 4-4-1-2 : Graphics Settings Skip Scaning of External Gfx Card If Enable, it will not scan for External Gfx Card on PEG and PCH PCIE Ports. Primary Display Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.
Page 86
4.4.2.1 PCI Express Configuration of PCH-IO Figure 4-4-2-1 : PCH-IO Settings DMI Link ASPM Control Enable/Disable the control of Active State Power Management on SA side of the DMI Link. Native PCIE Enable PCIE Express Native Support Enable/Disable. SUMIT A (PCIe x4) Bios options for PCIe devices on SUMIT A Slot.
4.6 Boot Figure 4-6 : BIOS Boot Menu Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Enables or disables Quiet Boot option. Boot Option Sets the system boot order.
APPENDIX A : Isolated DIO Guide A.1 Function Description The EVS-1000 offers two 16-bit Isolated DIO 20-pin terminal block connector and a watchdog timer. Isolated DIO pins are fix by Hardware design that cannot change in/out direction in runtime process.
Page 94
A.3 Isolated DIO Signal Circuit Distribution folder include x32 and x64 versions, use batch file for installation. There are included as fallowed : Win7_32.bat : Installation for 32-bit driver Win7_64.bat : Windows update package which driver required (need to restart), and Installation for 64-bit driver Win8_32.bat, Win8_64.bat : Installation for driver, and...
Page 96
WDT Group : Write button : Set WDT when WDT setup text is valid. Stop button : Cancel WDT and counting. Use after Write button action. WDT setup text : User setting, WDT value, unit : second. Use for Write button activate. WDT counting text (read only) : WDT counting by program timer after set WDT.
APPENDIX C : RAID Installation Guide C.1 SATA Mode for RAID C.1.1 SATA Mode for RAID Please select SATA device to RAID mode on BIOS menu. Advanced → SATA Configuration → SATA Mode Selection → RAID (Skylake platform)/Intel RST Premium (Kaby Lake platform) C.1.2 UEFI Mode for RAID 1.
Page 102
C.3 To Install All Device Drivers of the System The instructions are as follows : 1. Install Chipset driver 2. Install Network driver 3. Install ME driver (if available) 4. Install Audio driver 5. Install VGA driver C.4 To Install "Intel Rapid Storage Technology" Software You can get the software on driver CD.
Page 104
C.9 Recovery and Auto Re-build When Using the SAME RAID HDD C.10 Recovery and Auto Re-build When Using DIFFERENT RAID HDD A warning will pop-up to ask you if the disk is not a member of the original RAID volume. If you press "Rebuild", it will replace the broken SATA HDD to the last SATA HDD of RAID volume.
Page 106
D.1 Intel® Core™ i7-6700TE (8M Cache, 2.40 GHz) with GT1030 Power on and boot to Win 10 64-bit Power on and boot to Win 10 64-bit Standby Mode Idle status CPU Power Sleep Mode usage less 3% Input Current Consumption Current Consumption Current...
Page 108
D.3 Intel® Core™ i7-6700TE (8M Cache, 2.40 GHz) with GTX1060 Power on and boot to Win 10 64-bit Power on and boot to Win 10 64-bit Standby Mode Idle status CPU Power Sleep Mode usage less 3% Input Current Consumption Current Consumption Current...
APPENDIX E : Supported Memory & Storage List E.1 Supported Memory List Testing Board EVS-1000 i7-6700TE Memory Test Version : 5.1 BurnInTest V 8.1 E.2 Test Item Remove Channel Memory Test Burn In Flash BIOS Battery PASS PASS PASS PASS...