Front Panel I/O Functions - Vecow MTC-6000 User Manual

2.2 Front Panel I/O Functions

In Vecow MTC-6000 series family, all I/O connectors are located on front panel
and rear panel. Most of the general connections to computer device, such as
USB, DVI-D, DisplayPort, LAN Jack and any additional storage, are placed on
the front panel.
2.2.1 Reset Tact Switch
HDD
PWR
POWER
It is a hardware reset switch. Please use this switch to reset MTC-6000 without
power off. Press the Reset Switch for a few seconds, and then reset will be
enabled.
2.2.2 Power Button
HDD
PWR
POWER
The Power Button is a non-latched switch with dual color LED indications. It
indicates power status : S0, S3 and S5. More detail LED indications are listed
as follows :
LED Color
Solid Blue
Solid Orange
To power on MTC-6000, please press the power button and then the blue LED
is lightened. To power off the system, you can either command shutdown by OS
operation, or just simply press the power button.
If system error, you can just press the power button for 4-seconds to shut down
the machine directly. Please do note that a 4-second interval between each
2 power-on/power-off operation is necessary in normal working status. (For
example, once turning off the system, you have to wait for 4 seconds to initiate
another power-on operation.)
©Vecow MTC-6000 User Manual
DVI-D
DP 1
RESET
DVI-D
DP 1
RESET
Power Status
S0
S3, S5
SIM 1
DP 2
USB 3.0 USB 3.0
SIM 1
DP 2
USB 3.0 USB 3.0
System Status
System working
Suspend to RAM, System off with standby
power
GETTING TO KNOW YOUR MTC-6000
Powered
PD
SIM 2
Device
1 2
WLAN WLAN
CFast
LAN1 LAN2
Powered
PD
SIM 2
Device
1 2
WLAN WLAN
CFast
LAN1 LAN2
33