Connecting Hydraulic Hoses - SaMASZ KDD 860 W Operator's Manual

Fig. 14. Connecting mower to the tractor

5.1.1. Connecting hydraulic hoses

The circuit is under high pressure.
WARNING:
Before beginning any maintenance work on the hydraulic system, turn off the
engine (if it is on), apply the hand brake, remove the ignition keys from the
dashboard and lower the machine to the ground.
(Applies to all mowers with conveyors)
For all mowers with conveyors and their own hydraulics, connect hydraulic hoses to tractor as
follows yellow – A, green – B and red – C (see decal N-108 – Fig. 16a in separate sections of
tractor's hydraulic assembly (Fig. 16b).
Make sure that the hydraulic hoses have been inserted properly and that
match. Make sure that there are no leaks in the hydraulic system and that the connections have been
correctly made.
WARNING:
Leaking fluid (hydraulic oil) at the high pressure can
penetrate under the skin and cause serious injure or death. If leaking fluid
penetrates skin, immediately seek medical assistance in order to prevent the
risk of serious infection.
Operator's manual
C
S
W
S
C – red hose
Fig. 16a. Hydraulic hoses mower - tractor
Double-sided disc mowers
with central suspension
Z – blocked lock
a)
Fig. 15. Position of the lock
B – green hose
- 25 -
Z – unblocked lock
b)
A – yellow hose
colours of the hoses
the