Table of Contents
Advertisement
7.3. Roller conditioner's gearbox
Before you check the lubrication of the gearbox, remove the safety guard. Every day before
starting work, check the oil level and, if needed, refill after having removed the vent A on the top of
the gearbox (Fig. 50) The oil level can be checked through the check opening B on the side of the
gear. Refill the oil until it is visible in the check opening B. The oil level: about 0.5 l. Check oil
level when the cutterbar is on the ground. Removing the old oil from the gearbox is done through
the outlet C.
Tab. 8. Oil capacities in roller conditioner's gearbox
Model
Oil capacity [l]
Oil type
A
Fig. 50. Roller conditioner's gearbox lubrication
7.4. Chain drives of the roller and the scarifier
On Fig. 52 are shown openings through which the chains of the chain drives can be
lubricated. These points are additionally designated by N-75 labels. This procedure should be
repeated every 50 work hours of the machine.
a)
Operator's manual
Oil type –
for gearboxes
0.5
80W90
B
C
points
50 h
Fig. 52. Chain lubrication points – a) rollers, b) scarifier
Double-sided disc mowers
with central suspension
Lubrication frequency
Once every 3 seasons
(if working intensively)
Lubrication
points
Fig. 51. Bearing lubrication point with LT43
b)
- 50 -
grease
50 h
Advertisement
Table of Contents
