SaMASZ KDD 860 W Operator's Manual page 40

Fig. 31. Adjustment of swath guides: 1 - swath guide, 2 - locknuts, 3- arm adjustment screws, 4 - locknuts,
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 32)
(for: KDD 861 S (H), KDD 941 S (H), KDD 860 S (H) and KDD 940 S (H), KDD 861 S T (H),
KDD 941 S T (H), KDD 860 S T (H) and KDD 940 S T (H)):
loosen eye screw (2) of the swath guide,
set the swath guide (1) as needed,
tighten screw (2),
even spreading of swath might be adjusted with wheels (3) the same as it is preformed with
guides.
Fig. 32. Adjustment of swath guides: 1- swath guide, 2 - adjustment screw, 3 - swath wheel
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 33)
(for: KDD 860 W (H), KDD 940 W (H), KDD 860 W T (H), KDD 940 W T (H)): loosen eye
screw (2) of the swath guide,
set the swath guide (1) as needed,
tighten screw (2).
Operator's manual
1
5- shield adjustment screws, 6- guide arm, 7- shield
- 38 -
Double-sided disc mowers
with central suspension
2
3
1
6 4 5
7
2
1
3