Motorola MTP850 Ex Product Information Manual page 69

Call-Out
8.3 Exception Handling
8.3.1 Emergency mode
When user received Call-out alert while in Emergency Mode, message will be ignored.
8.3.2 Transmit Inhibit Mode (TXI)
The user is able to receive the message but it is not able to respond to it until TXI mode is
deactivated. When the user decides to leave the TXI mode after viewing the message, the terminal
will prompt to accept, standby or reject the call-out.
8.3.3 Direct Mode Operation (DMO)
Call-Out feature is not supported in DMO.
8.3.4 Fallback Mode
This mode is available when users are in Local Site Trunking. In case of the Fallback mode an MS
user is able to initiate a Call-Out call. The receiver-MS enters the Call-Out Fallback mode, which
includes only voice communication, upon receiving the Call-Out call. The user can clear the Fallback
mode only manually.
8.3.5 Call-Out test
Dispatcher is able to test this feature by using Call-out test. Terminal will display 'Call-Out Test' and
generate the alert tone. Only one soft key is available for the user with the label Test OK. After
responding the display will return to its previous mode.
8.3.6 Storm Plan alert
This is special case of Call-Out because:
•
•
It is sent several times to raise reliability.
March 2009
it is sent out to the larger group of people
user is able to respond with any key stroke and after that will be moved to information
phase
Chapter 2 - MTP850 Ex/MTP810 Ex Product Information Manual
2-27
6866588D21-D