Motorola MTP850 Ex Product Information Manual page 238

3-132
28.3.3 Change Audio Profile
If enabled, the terminal user can toggle through Audio Profiles (Paragraph 18.13.2 "Audio Profiles")
via a one touch button press.
28.3.4 Screen Saver Activation
If enabled, this will enable the terminal user to enter the screen saver mode, via a one touch button
press, to hide displayed terminal information.
28.3.5 PABX Call
Once this option has been selected, the 'PABX Call To' Field Name is displayed.
Place the pointer into the 'Field Value', click on the down arrow to display the Contact Book \ PABX
List. Place the pointer on the required option and select the option by clicking the left mouse button.
The selected phone number will now be entered into this field.
28.3.6 Phone Call
Once this option has been selected, the 'Phone Call To' Field Name is displayed.
Place the pointer into the 'Field Value', click on the down arrow to display the Contact Book \ Phone
List. Place the pointer on the required option and select the option by clicking the left mouse button.
The selected phone number will now be entered into this field.
28.3.7 Private Call
Once this option has been selected, the 'Private Call To' and 'Private Call Type' Field Names are
displayed, both of which are editable.
28.3.7.1 Private Call To
Place the pointer into the 'Field Value', click on the down arrow to display the Contact Book \ Private
Call List, place the pointer on the required option and select it by clicking the left mouse button. The
selected ISSI with its associated name and list position will now be entered into this field.
28.3.7.2 Private Call Type
Place the pointer into the 'Field Value', click on the down arrow to display the Simplex \ Duplex
option, place the pointer on the required option and select it by clicking the left mouse button. The
selected option will now be entered into this field.
28.3.8 TXI (Transmit Inhibit)
When this option is chosen, the following fields are enabled:
28.3.8.1 Activate
When TXI is enabled, the terminal can send a status message informing the dispatcher that it is in
TXI mode and is receive only. The status message number is manually entered into this field and is
not selectable from the Status List entries.
28.3.8.2 Deactivate
When TXI is disabled, the terminal can send a status message informing the dispatcher that it is in
now in normal operating mode. The status message number is manually entered into this field and
is not selectable from the Status List entries.
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009