Table of Contents
Advertisement
3-72
18.4.12 PTT Call Back Timer
Upon initiating a call, if the terminal's user is not holding down the PTT when the network grants
transmit permission, the user shall be given this much time to begin transmitting before transmit
permission is rescinded.
The range for this option is 100 - 3000 seconds and the default is 3000 seconds.
18.4.13 PTT Call Back Timer Enabled
This feature is Enabled/Disabled by clicking in the check box.
18.4.14 PTT During Received Group Call
The parameter enables or disables the PTT when receiving Group Call. When disabled, a PTT
press is ignored during Group Call voice reception.
This feature is Enabled/Disabled by clicking in the check box.
18.4.15 Hook Method for Outgoing Simplex Individual Call
Defines the hook method setting when initiating a simplex individual call.
There are 2 types of hook method:
•
Direct - an individual call is initiated with direct setup.
•
Hook - an individual call is initiated with hook setup.
To select the option, put the pointer into the field value, click on the arrow, and drag the pointer to
the desired option.
Note: Some infrastructures may not support direct signaling for individual calls.
18.4.16 Preferred Hook Method for Incoming Simplex Individual Call
Defines the hook method with which the MS prefers to receive simplex individual calls. If the MS
receives a call with a different hook method, it will try to modify the call to its preferred hook method.
There are 2 types of hook method:
•
Direct - MS is configured to receive individual call with direct setup. The call goes through
directly without needing the recipient to accept the call, like in the case of group call.
•
Hook - MS is configured to receive individual call with hook setup. The recipient needs to
accept the individual call before a call can go through.
To select the option, put the pointer into the field value, click on the arrow, and drag the pointer to the
desired option.
18.4.17 PTT During Received Group Call
This feature determines whether the user has the possibility to PTT during an ongoing Group Call.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
