Motorola MTP850 Ex Product Information Manual page 129

Tools Menu (Administrator Login)
6.7 Status Bar
This option is used to toggle the status bar display on or off. The status bar is located at the bottom
of the work window and displays information about a command, toolbar button or an operation in
progress.
7 Tools Menu (Administrator Login)
The following options/sub menus are available when the CPS is opened using the administrative
login.
These options enable a terminal to be updated with the latest software release and code and also
may enable a terminal to be recovered if a codeplug is inadvertently upgraded when the terminal is
read using a later edition of CPS.
7.1 Power Off
After upgrading the terminal's codeplug operation, select this option to power down the terminal and
take it out of the programming 'Flash Mode'.
It is also possible to restore the terminal's to its normal mode of operation by disconnecting the
terminal from the programming cable, removing and then replacing the battery.
Either way will take the terminal out of the 'Flash Mode' that is required for CPS programming.
The Power Off option is recommended when programming as the terminal will be restored to normal
operation without having to remove the battery.
7.2 Upgrade Phone
This option is used to upgrade one, or several terminals simultaneously (up to 16 per computer).
It is possible to activate this operation by selecting either the "Upgrade Phone" option in the Tools
menu, or use the shortcut Ctrl+U.
CAUTION:
Do not disconnect the programming cable from the phone during the write operation. This will
destroy your terminal.
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
3-23
6866588D21-D