Table of Contents
Advertisement
Reading/Opening a Codeplug
10
Reading/Opening a Codeplug
To read a terminal codeplug, connect the terminal to the active Com. Port via the appropriate
programming lead for that terminal model (see chapter 1). Then either select the File menu and
Read Phone option or click on the Read Phone icon, this is the first icon on the Phone Icon bar, also
the others will be greyed out until a codeplug has been read.
Once selected the Read Phone Information box will be displayed. The CPS uses this box to update
the user with progress reports, including failure.
If a file is to be opened from archive, either select the File Menu and the 'Open Option' or click on
the open icon to display the Open Window dialogue box to select the file. Once selected the CPS
will display a wait prompt as it loads the file into the Work Screen
Once read, the codeplug will be displayed in the work screen for editing.
11
Phone Bar Icons
This bar, when selected, is displayed next to and on the same line as the main tool bar icons.
Placing the cursor over each icon will display its function, an explanation of which has previously
been given. These icons are a short cut to the option they represent.
March 2009
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
3-37
6866588D21-D
Advertisement
Table of Contents
