Table of Contents
Advertisement
Display Parameters
23.3
Home Mode Display
This sub menu has the following four options that define the text displayed during the various stages
of the terminal's power up and idle state.
23.3.1
Home Mode Display Text
An alphanumeric text string of up to 24 characters can be entered in this field and will be displayed
when ever the terminal is in Home Mode.
23.3.2
Home Mode Display Protocol Identifier
The number in this field defines the message protocol used by the terminal to transmit and receive
messages on the control channel when in Home Mode and enables the phone to identify the type of
received message as a Home Mode Display message and take any necessary action.
Note: Protocol Identifiers. These define the action a terminal must take when a message is
received. Some messages are displayed and others are actioned by the terminal, for example
DGNA updates.
The range is from 0 to 255, the default is 220.
For more information see: ETSI EN300 392 - 2 Paragraph 29.4.3.9 Table 439.
23.3.3
Welcome Screen
An alphanumeric text string of up to 36 characters can be entered in this field and will be displayed
as the terminal powers up.
March 2009
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
3-97
6866588D21-D
Advertisement
Table of Contents
