Motorola MTP830 S Quick Start Manual

MTP830 S
Quick Start Guide
LED Status Indicator
1 External Antenna Connector
2 Emergency Button
1
3 Programmable Rotary Knob
2
22
4 Earpiece
3
21
5 Programmable Side Key
4 20
6 Push-To-Talk Button (PTT)
5
7 Soft Key
6 19
8 Send Key
18
5 9 Speaker
7 7
10 Speaker Control Key
8 17
11 Side Connector
16
12 Bottom Connector
9
14
13 Battery Latch
10
15
Battery Capacity Information
14 Keypad Backlight Sensor
15 Bottom Microphone
16 Four Way Navigation Key
11
17 On-Off/End/Home Key
18 Menu Key
19 Greyscale / Color Display
20 Top Microphone
10
14
12
21 LED Status Indicator
13
22 Antenna
Indicator Status
Solid green In use
Blinking green In service
Solid red Out of service
Connecting to a network
Blinking red
Entering DMO
Transmit Inhibit in service
Solid orange
Channel busy in DMO
Blinking orange Incoming private or phone call
No indication Switched off
Information Description
Full (50% – 100% capacity)
Middle (20% – 50% capacity)
Low (10% – 20% capacity)
Very low (5% – 10% capacity)
Low battery message Less than 5% capacity
Installing the Battery Unlocking/Locking Keys
To unlock/lock the keypad, press the Menu button and then Left Navigation Key.
How to Hold Your Terminal
The terminal has two microphones: a top microphone for Simplex
dispatcher/private calls and a bottom microphone for Duplex telephone-like calls.
Remove the battery from its protective case.
When using low audio (Duplex calls), hold your terminal as you would a
Insert the battery top into the compartment as illustrated.
telephone. Speak into the bottom microphone. Listen via the earpiece. Keep
Carefully press the battery bottom downward until it clicks into place.
antenna at least 2.5 centimetres from your head and body.
Attaching the Antenna
When using high audio (Simplex calls), hold terminal in a vertical position with its
top microphone 5 to 10 centimetres away from your mouth. Speak into the top
microphone. Listen via the terminal's internal speaker. Keep antenna at least 2.5
centimetres from your head and body.
Turn the terminal off before attaching the antenna.
Align the bottom of the antenna and the screw-in base on the top of the
terminal.
Turn clockwise until snug. Do not force.
Looking After Your Terminal
Unlocking the Terminal
Never leave your terminal or battery in extreme temperatures (over +85 °C) - for
example, behind windscreen in very hot, direct sunlight.
Your terminal may be locked at power up. To unlock the terminal after
Do not immerse your terminal in water.
powering on, enter the code at the prompt using Software Numeric Keypad.
To clean your terminal, use a moistened or antistatic cloth.
The unlock code is originally set to 0000. Your Service Provider may change
Do not use a dry or electrostatically charged cloth.
this number before you receive your terminal.