Motorola MTP850 Ex Product Information Manual page 253

GPS
30.2.2 Destination ISSI
This is the destination Individual Short Subscriber Identity (ISSI) for Location Information Protocol
(LIP) reports. Usually this is the address of the LIP Location Server.
Type in the required value.
30.2.3 Min Reporting Interval
Duration which is not underrun between 2 successive LIP location reports. This duration or interval
provides a form of guarantee that the MS will ensure a minimum interval elapses between location
reports to avoid flooding the air interface.
If the user desires to receive all location reports as soon as the reports are triggered, this duration
should be set to a low value, for example 10 sec.
Type in the required value.
30.2.4 Max Data Age
This field specifies the acceptable maximum age of location data.
Type in the required value.
30.2.5 Max Response Time
This field specifies the maximum duration the GPS system has to acquire location data.
Type in the required value.
30.2.6 Delete All OTA LIP Location Report Requests
This field is responsible for removing all Over-the-Air (OTA) Location Information Protocol (LIP)
report requests (triggered requests) received over the air. This is a clean up measure to delete
orphaned requests that are no longer useful.
To clear all requests, press the Reset button.
30.3 LRRP Configuration
30.3.1 GPS SDS TL Disable
This field refers to location data transmissions via SDS (Short Data Services).
All location data transmissions will use SDS type 4, and no other transport mechanism.
If SDS TL Disable is checked, the PI for SDS GPS without TL header will be used. Otherwise, the PI
configured for SDS GPS with TL header will be used.
Note: We recommend the default setting (box checked) because the message over the air is
shorter.
March 2009 Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
3-147
6866588D21-D