Table of Contents
Advertisement
3-128
Each cell has the structure of information element "SDS (Short Data Service) Control".
27.3
TNP1 Options
This menu is used to set the button/key functionality and it has the following options:
27.3.1
TNP1 Support
The TNP1 feature operates only when Packet Data or External Device is enabled in the codeplug
(for example: a PPP session with MT2 can be estabilished).
Turn the check box (Enable) or off (Disable) by clicking in the check box.
27.3.2
NO TE TEMTA-REPORT IND Counter Limit
This is a Service Profile timer. MT2 terminates its PPP link with TE2 and resets to zero he NO
TEMTA-REPORT IND counter when the counter reaches its maximum value.
The range of this timer is 1 to 100.
27.3.3
TE TEMTA-REPORT IND Timer
This is a Service Profile timer. MT2 uses TE TEMTA-REPORT IND timer in combination with
NO TEMTA-REPORT IND counter over limit to decide when to terminate the PPP link
The range of this timer is 1 to 300.
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
