Table of Contents
Advertisement
3-152
Enables/disables the GPS Event Location.
•
If Enabled, the Unsolicited Location Report on occurrence of this event is enabled (subject to
other codeplug settings).
•
If Disabled, the Unsolicited Location Report on occurrence of this event is disabled.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
This field is an element in the codeplug structure for the Unsolicited Report Profiles. The actual
value depends on the particular Profile.
GPS Event Timestamp Enable
Enables/disables the GPS Event Timestamp.
•
If Enabled, Unsolicited Location Reports on occurrence of this event shall have timestamps.
•
If Disabled, Unsolicited Location Reports on occurrence of this event shall NOT have
timestamps.
This field is an element in the codeplug structure for Unsolicited Report Profiles; the actual value
depends on the particular Profile.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
GPS LRRP Destination ISSI
This is the destination ISSI for Unsolicited Location Reports.
This field is an element in the codeplug structure for Unsolicited Report Profiles; the actual value
depends on the particular Profile.
The range is any valid ISSI or NO_ISSI. (NO_ISSI is a reserved value outside the range of possible
ISSIs, and only used to indicate that no ISSI has been assigned to the field in question.)
Type in the required value.
GPS LRRP Unsolicited Shape
This is the Shape to use for Unsolicited Location Reports:
•
SHAPE_2d: a two-dimensional (latitude and longitude) position.
•
SHAPE_3d: a three-dimensional (latitude, longitude and height) position.
This field is an element in the codeplug structure for Unsolicited Report Profiles; the actual value
depends on the particular Profile.
To assign a setting, put the pointer into the field value, click on the arrow, and drag the pointer to the
desired setting.
GPS LRRP Unsolicited Velocity Type
This is the Velocity Type to use for Unsolicited Location Reports:
•
No speed reported
•
Horizontal speed: gives the magnitude of the horizontal component of the velocity of a target
entity.
•
Horizontal speed with high accuracy
•
Vertical speed: gives the magnitude of the vertical component of the velocity of a target entity.
•
Vertical speed with high accuracy
•
Horizontal and vertical speed
•
Horizontal and vertical speed with high accuracy
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
