Table of Contents
Advertisement
3-64
Also called PPC Group Call, which is an outgoing group call with emergency call priority made from
Emergency mode only.
To send an emergency call, the user enters Emergency mode to initiate an Emergency Call and
presses the PTT, unless the Hot Mic feature is enabled.
See related fields:
Paragraph 22.1 "Hot Mic"
18.2.3
TMO Emergency Services
There are two TMO Emergency Services options:
•
Emergency SDS (Short Data Service) Status
•
Emergency Call/Emergency Alarm
To change the setting, select the field value, then select desired setting.
The following occurs:
•
If you select Emergency SDS Status, Emergency Call and Emergency Alarm fields will be
"greyed out".
•
If you select Emergency Call/Emergency Alarm, Emergency SDS Status Destination,
Emergency SDS Status Value, and Emergency SDS Alias will be "greyed out".
18.2.4
Emergency Console Acknowledge
This feature determines whether or not the terminal should expect an acknowledgement to an
Emergency Alarm or Priority Dialing (Priority Dispatch Number) from the RCM (Radio Control
Manager)/Dispatcher.
The feature is Enable/Disable by clicking in the check box.
18.2.5
Emergency Switch Power Up
This feature enables the terminal to be powered up and enter emergency mode by an external
source that provides the necessary emergency input.
18.2.6
Emergency Call Type
The terminal is able to set up an emergency call to either a Group or Private address (ISSI).
18.2.7
Emergency Started Timer
This defines the period of time in milliseconds that the user must keep the emergency button
pressed for the terminal to enter emergency mode.
The programmable range is 1 - 5000 msecs.
The default is 500 msecs
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
