Table of Contents
Advertisement
3-118
26.4
Short Data Service (SDS)
The following menu options are used to set the terminal's configuration for sending Status
Messages.
26.4.1
Individual SDS L3 Status ACK
If this option is enabled, by selecting the check box, the terminal will receive an acknowledgement
when a status message is sent to an individual ISSI.
The sending terminal does not receive the acknowledgement from the receiving terminal, but from
the system. If the receiving terminal is contactable by the system, the system will 'Ack' the message.
26.4.2
Group SDS L3 Status ACK
If this option is enabled, by selecting the check box, the terminal will receive an acknowledgement
when a status message is sent to a Group.
The sending terminal does not receive the acknowledgement from the receiving group terminals, but
from the system. If any of the receiving group members are contactable by the system, the system
will 'Ack' the message.
26.4.3
SDS Status Number of Retry
The Field Value entry for this option defines how many times the terminal will attempt to send a
status message.
The range is from 0 to 10.
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
