Table of Contents
Advertisement
3-96
23.1.6
Backlight Timer
This is the 'Auto' option timer and it defines how long the backlight will remain on, when the terminal
has gone back to its normal standby state.
The range setting is from 1 to 30 seconds, the default setting is 10 seconds.
23.2
Screen Saver
Some models have 'screen saver' functionality. If enabled, it will consist of 2 elements, for example:
•
A Police Force Logo, or similar graphics.
•
An identifier
This enhances:
•
Security by hiding sensitive information when the terminal is worn high on the chest at the
lapel.
•
Ease of identification by screen saver ID.
If configured, the user is able to edit the screen saver text.
Refer to the CPS help text on screen saver conversion.
23.2.1
Screen Saver Text
An alphanumeric text string of up to 12 characters can be entered in this field and will be displayed
when the terminal is in its idle state.
23.2.2
Time Screen Saver Activation
This field is used to set the time, in msecs, after which the screen saver text message will be
displayed. The range is 1000 - 216,000,000 msecs and the default is 35,000 msecs.
23.2.3
Screen Saver Enabled
This is a simple check box entry field that defines whether or not the screen saver is enabled. Use
the mouse pointer and select the check box by pressing the left mouse button to enable/disable this
option.
23.2.4
Auto Screen Saver
If enabled, the screen saver will automatically be displayed after a default period of terminal
inactivity.
6866588D21-D
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
