Table of Contents
Advertisement
3-62
•
Reject – the PPC call will not interrupt the ongoing call.
The option is selected by clicking on the down arrow in the field value box and drag the pointer to
the required option.
Requirements for the terminal to accept a PPC PTPC call during a non-emergency call are:
1.
The active call is one of the following:
•
•
•
The terminal will accept the PPC PTPC call during a non-emergency call:
•
•
2.
The active call is a Scan Group Call and the terminal is configured to Scan Group with lower
Priority.
The terminal will accept the PPC PTPC call during a non-emergency call:
•
•
18.1.4
Scan Group Priority Behaviour
This field has 2 options and defines whether or not the terminals active scan group priority is less
than or equal to that of an incoming PPC group call
Indicates whether or not a PPC with call priority 12, 13 is accepted during normal call.
The two options are:
•
Inferior Priority – the PPC group call will interrupt an on going group call.
•
Equal Priority – if this option is chosen, the user will be given the choice of dropping the on
going call and accepting the new PPC group call, or rejecting the new PPC group call and
continuing with the on going group call.
The option is selected by clicking on the down arrow in the field value box and drag the pointer to
the required option.
18.1.5
Audio Shock Delay Timer
Period of time in milliseconds. Defines time delay required to eliminate audio shock.
Audio shock occurs when the user receives the audio of the old call in the earpiece and the audio of
the new call is sent immediately to the speaker that may be very close to the user's ear.
6866588D21-D
PTPC
Selected/ATG/Broadcast Group Call
Scan Group Call, and the terminal is configured to Scan Group Equal Priority.
If the incoming PPC PTPC priority is 14 or 15 and higher than the priority of the active
call.
If the incoming call priority is 12 or 13 and higher than the priority of the active call, and
"Accept/Reject PPC PTPC priority 12,13 is set to "Accept".
If the call priority of the incoming PPC PTPC is 14 or 15.
If the call priority of the incoming PPC PTPC is 12 or 13 and "Accept/Reject PPC PTPC
priority 12,13 is set to "Accept".
Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009
Advertisement
Table of Contents
