Motorola MTP850 Ex Product Information Manual page 222

3-116
26.3.1 User Authentication
This is a method for authenticating the application user prior to allowing activation of the packet data
link and indicates whether or not the customer is configured with mandatory User Authentication.
Select the check box in this field to enable this option.
See Chapter 2 of the Product Information Manual, Paragraph "PD User Authentication"
26.3.2 Authenticator Name
Authenticator name is a 15 digit alphanumeric name/alias that has been set up on the system, for
the Mobile Terminal, that will allow the system to authenticate the user. According to this name, the
data Terminal Equipment user application defines which pair "user-name/password" is suitable for
this authenticator. The system must support user authentication, otherwise this feature if enabled in
the terminal will be ignored by the system.
26.3.3 Data Only
Specifies whether or not the Data Only feature will be enabled as part of the Packet Data features
that allows connection to an external device (such as a laptop PC). When set to Data Only Enable
and except for emergency calls, the phone will reject incoming and outgoing voice calls, status and
text messages. The phone will transmit and receive data via the external device. Select the check
box in this field to enable this option.
26.3.4 Voice & Data
Specifies whether or not Voice & Data feature will be enabled as part of the Packet Data features
that allows connection to an external device (such as a laptop PC). When set to Voice & Data
Enable, the phone will transmit and receive data using the external device. As voice calls have
priority over data calls, any received voice call will interrupt an on going data call. Select the check
box in this field to enable this option.
26.3.5 Voice Only
Specifies whether or not the Voice Only feature will be enabled as part of the Packet Data features
that allows connection to an external device (such as a laptop PC). When set to Voice Only Enable,
the phone will only transmit and receive voice calls. Select the check box in this field to enable this
option.
26.3.6 Default Packet Data Mode
This field defines the default Packet Data mode after power up and can be
• Data Only,
• Voice & Data, or
• Voice Only.
These options are only available if enabled in 3, 4 & 5 above.
Place the mouse arrow in the entry field and press the left mouse button to display the 'Down
Arrow'. Select the down arrow to display the available options, using the left mouse button select the
required option.
Related field is:
Paragraph 14.15 "Packet Data"
6866588D21-D Chapter 3 - MTP850 Ex/MTP810 Ex Product Information Manual
Customer Programming Software (CPS)
March 2009