Bennett LNG Series Installation Manual
This manual contains installation instructions for installing the LNG Series dispenser. Included are mechanical,
transporting, wiring, and start-up instructions. For any additional installation information on ground storage modules,
shear valves, hoses, breakaways, and the Liquid Natural Gas System. Please refer to the manufacturer's installation
instructions for proper installation.
Related Documents
Bennett 515 Pump Controller Installation & Service Manual ---------------------------------------------- Part# 105022
•
Bennett 621 Interconnection Box Installation, Service, & Parts Manual ---------------------------------- Part# 116186
•
Bennett Natural Gas Series Operators Manual ------------------------------------------------------------- Part# 123919
•
Bennett LNG Series Service Manual ------------------------------------------------------------------------ Part# 120149
•
LNG Series Audit Report ----------------------------------------------------------------------------------- Part# 119640
•
Simply Secure Payment PCI 3.1 (SSP Color) Programming, Service, and Part Manual ------------------- Part# 124184
•
Simply Secure Payment PCI 3.1 (SSP Large Display) Programming, Service, and Parts Manual --------- Part# 128203
•
Power Requirements
AC Power Input, Electronic ............................................................................................................................ 120 VAC, 60 Hz. 560 Watts Max.
DC Power Supply Output ............................................................................................................................................ +5 VDC at 5.0 Amps Max.
Lead-Acid Battery Output ........................................................................................................................................... +12 VDC at 2.0 Amp Max.
Nickel-Cadmium Battery Output ...................................................................................................................... +3.6 VDC at 40 Milliamp Max.
Environmental Requirements
Operating Temperature Range .................................................................................................................. -20°C to +40°C (-4°F to +140°F)
Humidity ................................................................................................................................................................................. 0-95% non-condensing
Dimensions
LNG Series Maximum without valance ....................................................................... 54.25" (width) x 22" (depth) x 91.375" (height)
LNG Series Base .................................................................................................................................................... 43 ½" (width) x 19 ¼" (depth)
Codes and Standards
NFPA 30 – Flammable and Combustible Liquids Standard
•
NFPA 30A – Motor Fuel Dispensing Facilities Standard
•
NFPA 52 – Vehicular Gaseous Fuel Systems Code
•
NFPA 57 – Liquefied Natural Gas (LNG) Vehicular Fuel Systems Code
•
NFPA 59A – Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
•
NFPA 70 – National Electric Code
•
ASME/ANSI B31.3 – Process Piping
•
International Fire Code
•
Introduction
1
Introduction
+12 VDC at 1.75 Amps Max.
+24 VDC at 2.75 Amps Max.