Introduction; Related Documents; Features And Capabilities - Bennett 4000 Series Operator's Manual

Bennett 4K Series Operators Manual
This manual contains the operation instructions used for the 4000 Series Dispenser. Included are descriptions of
various control devices, how to operate the dispenser, programming, troubleshooting, and maintenance information.
Please refer to any original equipment manufacturer's operating instructions for proper operation.

Related Documents

Bennett 515 Pump Controller Installation & Service Manual ------------------------------------------ Part # 105022

Bennett 4000 Series Installation Manual --------------------------------------------------------------- Part # 126869


Features and Capabilities

All 4K dispensers can be operated in the stand-alone mode meaning no control console or with a control console
system such as the 515 in conjunction with a third party Point of Sale (POS) system.
1. A self-monitoring pulser will prevent product flow in the event of a malfunction.
2. A diagnostic software system is built-in to aid in troubleshooting.
3. A Manager's access code prevents unauthorized changes.
4. 5" Money and Volume LCD displays and .4" PPV LCD displays that are lit from the back with high efficiency, low
power LED's for easier viewing.
5. An allocation limit can be set from 1 to 999 gallons or 9,999 liters at the dispenser.
6. Maximum display values for Menu Code 8, option 0 are shown in the table below. Refer to
Change the Decimal Point Locations
Dollars
Gallons
Liters
Price Per Volume
7. A Magnetic Reed Switch is provided for recalling display information during a power failure. Refer to the
Devices section for more information.
8. Two battery back-up systems are provided:
A +12 volt DC sealed lead acid battery works in conjunction with the totals display recall switch to display

the last sale data or pump totals when AC power is interrupted. The battery will allow the displays to be
viewed in 30-second intervals for a total of up to 20 minutes.
A +3.6 volt DC NiMH (Nickel Metal Hydride) battery is used by the MCU (Microcontroller Unit) to save data

to the EEPROM (Electrically Erasable Programmable Read-Only Memory) before disconnecting both
batteries. The EEPROM has a data retention life of 200 years.
9. All units have conformal coated electronic boards to help protect them from moisture or foreign material
damage. All major electronic board assemblies are environmentally tested and temperature cycled.
10. All major low voltage connectors incorporate gold on gold contacts to prevent oxidation and promote reliability.
11. The dispenser meets or exceeds FCC Emission Standards and UL specifications.
12. Dispenser programming is performed from the Manager's Keypad or the Local Preset Keypad. The Manager's
keypad is located inside the electronics head behind the side 1 electronics door

Introduction

for more information.
Each Sale
9999.99
999.999
9999.99
99.999
1
Introduction
Menu Code 8 How to
Totals
9,999,999.99
9,999,999.999
99,999,999.99
Control