Bennett 3000 Series Service Manual page 11

How to Display Electronic Totals - To display electronic totals on the
3000 series commercial dispenser you must use a magnet. See figure
1.
Using a magnet, place the magnet on the right edge of the (Money /
Volume) display window. The magnet activates the electronic totals
display and the Audit Trail. The magnet activates a switch on the CPU
and the money and volume totals will be displayed along with an audit
report for 30 seconds.
Note - The nozzle lever must be in the "Off" position while accessing
electronic totals.
How to read the Electronic Totals - See Figures 1,2, and 3. When a
magnet is used to display the electronic totals, the first total displayed
will be "Money" totals (Only in a retail dispenser. Since this is a
"Commercial/Industrial" dispenser, money will NOT be displayed. This
example does show a retail dispenser. In this case the top row shows
the 6 most significant digits and the lower row shows the least most
significant digits. This example shows a total of $666,674,638.90 for
this hose / product).
After displaying the money total for 10 seconds, the display shows
"Volume" totals. This example shows 66,670,709.149 (gallons or
volume units). After several seconds, the display returns to normal.
How to Operate the Dispenser
11
Fig. 1 - Although this example shows a
retail dispenser, the commercial works
the same way. Place a magnet in the
upper right area of the display as
shown.
Fig. 2 - The display will show the
current money electronic total (Retail
system only) for 10 seconds. Then the
volume electronic total will
displayed. See Fig. 3
Fig. 3 - On a commercial / industrial
dispenser, only volume totals are
displayed. The display shows current
electronic volume for 10 seconds and
then returns to the normal display.
107932 Rev G 4-24-17
Magnet
be