Maintenance; Specifications - Game ready GRPro 2.1 CONTROL UNIT User Manual

The reservoir filter should be inspected, cleaned, and/or replaced as necessary.
Identify the filter within
1
the ice reservoir.
Rinse debris from the
4
filter and be sure there
are no obvious signs of
damage.
If you have questions
or would like to order
a new filter, in the
U.S. call Game Ready
Customer Service at
1.888.426.3732
(+1.510.868.2100);
from outside of the
U.S. please contact
your local distributor.
Other than maintaining the reservoir filter, no product service or modification should be
performed by the user. If your GRPro 2.1 System requires service, in the U.S. call Game
Ready Customer Service at 1.888.426.3732 (+1.510.868.2100); from outside of the U.S.
please contact your local distributor.
Size: 16.25" length x 7.75" width x 9.25" height (413 x 197 x 235) mm, not including Carry Bag
Weight: 7.3 lb. empty, approximately 18 lb. full of ice and water
Pressure level: cycles from 5mm Hg up to 75mm Hg
AC power: 100-240 V~, 50-60 Hz, 1.6A
DC input: 12V/2.5 A
• The maximum operating temperature of the equipment is between 33.8-104ºF (1-40ºC).
• The maximum operating altitude of the equipment is 9,843 feet (3,000 meters).
• The expected service life of the Control Unit is 5 years. The expected service life of the
parts and accessories shipped with the Control Unit is 2 Years.
EN- 14
M A I N T E N A N C E
Using two fingers, grasp
2
and squeeze the two
protruding prongs.
5 To replace the filter, or install
a new filter, first ensure
that the filter is oriented
properly with the plastic
tab facing up. If the filter is
not oriented properly, the
protruding tab will prevent
the filter from sliding back
into place.
S P E C I F I C A T I O N S
Slide the filter out.
3
You will feel and
6
hear the filter snap
back into place.